Control condensation due to excessive humidity in covered swimming pools

Category: Dehumidifiers
Control condensation due to excessive humidity in covered swimming pools

Promote comfort in people and take care of infrastructure of public and private swimming pools

Usually the large covered aquatic areas, which are intended for recreation or sports, tend to have a large influx of people, so maintenance work becomes even more fundamental for these spaces. Likewise, there are certain aspects that must be taken care of every day of the week: the appearance of humidity.

Dehumidifier effects
Dehumidifier effects

Not controlling this will not only attract possible structural damage, also depending on the construction materials, but also health issues for customers and workers, due to the proliferation of mold on the surfaces. Therefore, it is essential that the appropriate cleaning products are applied to eliminate all types of harmful microorganisms, and in turn, locate dehumidifiers in strategic places, where there is more condensation, to keep humidity controlled. That would certainly help a deep cleaning.

Likewise, allowing the correct air circulation is essential for swimmers and workers to feel more comfortable, since the heat can be strenuous in indoor pools. Therefore, natural and mechanical ventilation must be at its maximum capacity. If possible, then embed or attach desiccant systems, for maximum air purity.

High probability of mold appearance with saturation above 60%

According to specialists, this percentage or more makes it possible for microorganisms to appear in any space. It is obvious that in covered swimming pools, evaporation is constant and with high peaks of atmospheric saturation. Due to these constant condensations, it is very important to dry the environment at all hours, using portable or fixed dehumidifiers, to balance the atmospheric saturation.

Not taking care of this, it will only lead to increases in humidity well above what should be in a structure of this type, which will later lead to the appearance of mold, corroding the plaster, wood and metal materials; if this

Dehumidifier for clean the swimming pool
Dehumidifier for clean the swimming pool

situation is neglected, it could lead to significant expenses.

In addition, these microorganisms are harmful to humans, and considering that in closed public or private swimming pools, there is a significant influx of children and the elderly, because their health is endangered, due to the eventual appearance of moisture fungi.

The humidity range should always be between 40% and 60% in this class of recreational and sports venues, with good dehumidifiers and mechanical or natural ventilation, and of course, the normal cleaning that must be done.

Dehumidification processes for covered pools with the help of portable or fixed dehumidifiers

  1. Help yourself with the natural circulation of air. This in open pools does not imply a problem, but when it is a closed place, then you have to take advantage of the construction of the building, due to its natural air inlets and outlets. You do not have to resort to air conditioning mechanisms at all times. Orientation must be used for optimal wind circulation.
  2. Use steam insulators. These are ductile so that the thermal variations are not so extreme when the outdoor temperature drops, and the dew point is present. These barriers will reduce the incidence of eventual condensation on the building structure and the pool itself. You just have to place them correctly, on the inside of the walls.
  3. Special glass in doors and windows. They have low thermal transmission, so that the condensation
    Dehumidifier in swimming pool in a house

    adheres as little as possible. Some install double glazing with an air chamber, to mitigate the effects of condensation. If you want to increase the effectiveness, it is advisable to build a dehumidifier near the glass, in doors and windows.

  4. Coverings are generally not recommended for surfaces in enclosed pools, because being enclosed spaces, they could impede optimal natural air circulation. In addition to that, when there is moisture on the surface of the structure below the plaster, it will be necessary to remove these coatings again, to do the necessary plumbing work, involving more expenses.

Dehumidifying systems can help mitigate those conditions, with a good job of constant monitoring, for good humidity and temperature control. It will be enough to find the best models for your needs.

Recent Posts

Categories